EN
Materials in direct or indirect contact with the patient
o
Concentrator casing ............................... Valtra/ABS/Polystyrene
o
Concentrator Control Panel ..................... Polyester EBG7 or equivalent
o
Control Panel Door ................................. Polycarbonate
o
Concentrator Handle .............................. Polycarbonate
o
Gas Outlet, Nozzle ................................. Polycarbonate
o
Unit Label ............................................... Lexan
o
Coil Cords ............................................... Polyurethane
o
Cord connectors ..................................... Polycarbonate/Vinyl chloride
o
Power Cord ............................................. PVC, Metal
o
Power Supply .......................................... Lexan 940(Polycarbonate)
o
Battery Pack ............................................ Lexan 945
o
Battery Pack, Power Supply Labels ........ Polyester film
o
Concentrator carrying case ..................... 100% Polyester microfiber w/
o
Battery carrying case, Belt and Strap ...... 100% Polyester microfiber w/
Reserve Oxygen Supply
Your Equipment Provider may recommend another source of supplemental
oxygen therapy in case there is a mechanical failure or a power outage.
Troubleshooting
The FreeStyle product is designed for years of trouble-free use.
If your FreeStyle Portable Oxygen Concentrator fails to operate properly, refer to
the chart on the following pages for possible causes and solutions and, if
needed, consult your Equipment Provider.
Do not attempt any maintenance other than the possible solutions
listed below.
EN-38
PCV backing
PVC backing
AirSep
MN131-1 rev. B - 02/13
FreeStyle™
®
Corporation