Graduations; Date Format; Date Setup; Time Format - OHAUS Pioneer PXP Serie Manual De Instrucciones

EN-20

5.3.6 Graduations

Set the displayed readability of the balance.
1 Division = standard readability.
10 Divisions = readability is increased by a factor of 10.
For example, if the standard readability is 0.01 g, selecting 10 Divisions will result in a displayed reading of 0.1 g.

5.3.7 Date Format

Set the current date format.
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY

5.3.8 Date Setup

Set the date in the current date format.
For example, if the date format is MM/DD/YYYY, the date could be set as "06/22/2017 Thu".

5.3.9 Time Format

Set the current time format.
24HR
12HR

5.3.10 Time Setup

Set the time in the current time format.
For example, if the time format is 24HR, the time could be set as 08:00:00.

5.3.11 Brightness

Set the brightness of the display.
Low
Medium
High

5.3.12 Auto Dim

Set whether the balance automatically turns off the display backlight of the display.
Off = disabled
10 minutes = become dim if there is no motion in the display for 10 minutes
20 minutes = become dim if there is no motion in the display for 20 minutes
30 minutes = become dim if there is no motion in the display for 30 minutes

5.3.13 Capacity Bar

Off = disabled
On = enabled
When the capacity is set On, a capacity bar will display at the bottom of the screen. The capacity bar will roughly
show the current weight as a percentage of balance capacity. When the display is at zero, the capacity bar will not
display.
PXP Series Balance