Percent Weighing - OHAUS Pioneer PXP Serie Manual De Instrucciones

EN-10
APW Optimization:
Improving counting accuracy by re-calculating the piece weight
automatically as parts are added.
APW Optimization occurs only when the number of pieces
added to the pan is between one and three times the number
already on the pan.
Print Settings:
Changing printing setup. See Section 7 for more information.
4.3

Percent Weighing

Note: Before using any application, be sure the balance has been leveled and calibrated.
Use Percent Weighing to display the weight of a test object as a percentage of a pre-established reference
sample.
The default (or last) reference weight is displayed.
Percent Weighing
1. Press and hold the Function / Mode button until
Percent Weighing appears.
2. After confirmation by pressing Yes, the message
"Clear reference?" will appear on the screen.
3. Press Yes, and then the message "Place sample" will
display.
4. Place the reference sample on the pan to display the
weight. When the reading is stable, the * will appear.
5. Press the Function / Mode button so that the weight
of the reference sample is stored in memory. The
display will show 100%.
PXP Series Balance