Installation; Unpacking; Select The Location; Leveling - OHAUS Pioneer PXP Serie Manual De Instrucciones

EN-4

2. INSTALLATION

2.1 Unpacking

Carefully remove your PXP balance and each of its components from the package. The included components vary
depending on the balance model (see the list below). Save the packaging to ensure safe storage and transport.
Please read the manual completely before installing and using the Adventurer balance to avoid incorrect operation.
Components included:
Balance
Power adapter + Attaching plug
Stainless steel pan
Pan support (for 0.1 g / 0.01 g / 0.00001 g model only)
Warrenty card

2.2 Select the Location

Avoid heat sources, rapid temperature changes, air current or excessive vibrations. Allow sufficient space.

2.3 Leveling

Be sure the balance is level before it is used or after
its location is changed.
The PXP balance has a level bubble in a small round
window beside the display.
To level the balance, adjust the 4 Leveling Feet until
the bubble is centered in the circle.
Please refer to Figure 2-1 for leveling.
PXP Series Balance
Figure 2-1. Leveling