Handshake; Print Settings; Stable Only; Numeric Only - OHAUS Pioneer PXP Serie Manual De Instrucciones

EN-24

5.5.3 Handshake

Set the flow control method.
None
Xon-Xoff
Hardware

5.6 Print Settings

Enter this sub-menu to customize data transfer settings.

5.6.1 Stable Only

Off = values are printed immediately, regardless of stability.
On = values are printed only when the stability criteria are met.

5.6.2 Numeric Only

Off = All selected results are printed.
On = Only numeric data values are printed.

5.6.3 Single Header

Off = Headers will be printed for every print requirement.
On = Headers will be printed once a day.

5.6.4 Print To

PC = print data to a PC
Printer = print data to a printer

5.6.5 Auto Print

Off
On Stability 1
Print Interval 2
Continuous
1 When On Stability is selected, set the conditions for printing.
Load = Prints when the displayed load is stable.
Load and Zero = Prints when the displayed load and zero readings are stable.
2 When Print Interval is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.

5.6.6 Header

On = the header is printed.
Off = the header is not printed.

5.6.7 Date and Time

On = the date and the time are printed.
Off = neither the date nor the time is printed.
= no handshaking
= XON/XOFF handshaking
= hardware handshaking
= disabled
= printing occurs each time the stability criteria are met.
= printing occurs at the defined time interval.
= printing occurs continuously.

PXP Series Balance