Chain Looper Tension; Needles - Janome 1200D Professional Manual De Instrucciones

M. Chain Looper Tension (Brown)
Thread the chain looper tension for either 5-Thread
stitch or after selecting any stitch in program 10.
Example:
• 5-Thread stitch (Yellow):
Thread the chain looper tension and set it to N.
• 3-Thread Wide and Overlock 3 (Blank):
Do not thread chain looper.

Needles

The machine is supplied with EL x 705 needles.
This is an industrial type needle that ensures proper
stitch formation at high speeds. The scarf (dent on
needle back) is important because it allows the looper
to come near the needle to catch the thread and form a
stitch. EL x 705 needles are available in two sizes – 80/
12 and 90/14.
It is possible to use conventional sewing machine
needles – 130/705H – for special threads and fabrics.
Common stitch problems can often be traced directly to
the needle.
• • • • • Needle inserted incorrectly. (Flat side should be to
the back.)
• • • • • Needle not pushed up high enough into position.
• • • • • Needle is dull or has burrs. (Change needles
frequently; even new needles can have
imperfections.)
32