Directions For Use - Boston Scientific Precision Spectra OMG SC-9315 Instrucciones De Uso

Ocultar thumbs Ver también para Precision Spectra OMG SC-9315:
Tabla de contenido

Publicidad

Precision Spectra™ OMG™ Adapter
Compatibility with St. Jude Leads
When used with the Precision Spectra ETS,
the Precision Spectra OMG Adapter and OMG
Connector-A shall be compatible with the following
St. Jude leads and OR Cable Assembly available
prior to September 2013.
St. Jude OR Cable
Assembly
OR Cable Assembly
St. Jude Lead
Trial lead, 4-Channel
Trial lead, 8-Channel
Axxess® Trial Lead
Octrode®
Quattrode®
Axxess®
Lamitrode® 22
Lamitrode® 4
Lamitrode® 8
Lamitrode® 44 and 44C
Lamitrode® Tripole 8 & 8c
Lamitrode® Tripole 16 & 16c
Lamitrode® 88 & 88c
Penta
Lamitrode S-8
Axxess, Octrode Quattrode and Lamitrode are trademarks of Advanced
Neuromodulation Systems
* These models numbers should be programmed in
manual mode
** Program only the mapped contacts on the
representative Boston Scientific lead
Precision Spectra™ OMG™ Adapter
90870349-04
2 of 81
Model Number
3009
Model Number
3046**
3086
4044**, 4054**
3183, 3186, 3189, 3181
3143**, 3146**, 3149**,
3141**, 3153**, 3156**,
3159**, 3151**
4143**, 4146**, 4153**,
4156**
3222*
3240**, 3254**, 3255**
3280
3244*, 3262*, 3263*,
3245*,3264*, 3265*
3208,* 3210*
3214, 3219
3288*, 3289*
3228*
3283, 3286, 3268, 3269

Directions for Use

Connecting the Precision Spectra
OMG Adapter
1. Inspect the Precision Spectra OMG Adapter,
OMG Connector-M, or OMG Connector-A for
damage. If damaged, do not proceed. Return
the damaged component(s) to Boston Scientific
Neuromodulation.
2. Turn off the Medtronic/St. Jude External Trial
Stimulator (ETS).
CAUTION
Failure to turn off the Medtronic/St. Jude ETS
before disconnecting the OR Cable may result in
excess stimulation.
3. Disconnect the proximal end(s) of the Medtronic/
St. Jude OR Cable Assembly from the ETS and
insert into the corresponding port on the OMG
Connector:
OMG Connector-A
A.
Disconnect the proximal end(s) of the
St. Jude OR Cable Assembly and insert
it into the corresponding port on the
OMG Connector-A. Plug the St. Jude
OR Cables into the OMG Connector-A
socket(s) labeled "1-L" (left) and "2-R"
(right). If only a single lead is being used,
connect it to "1-L".
OMG Connector-M
B.
Medtronic Twist-Lock Screening Cables
(Model # 3550-03)
• If the trial is using the Twist-Lock
Screening Cables, plug the Twist-
Lock Screening Cable into the OMG
Connector socket(s) labeled "1-L"
(left) for a single-lead trial. The lead
shows up as contacts 1-4 in the Bionic
Navigator™ 3D software.

Publicidad

Tabla de contenido
loading

Tabla de contenido