Turning The Power On; Turning The Power Off - Roland SP-404SX Manual Del Usuario

Turning the Power On

NOTE
Once the connections have been completed, turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
1. Minimize the volume of the SP-404SX and your speakers .
Turn the SP-404SX's [VOLUME] knob all the way to the left.
2. Turn the SP-404SX's [POWER] switch ON .
NOTE
This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will
operate normally.
3. Turn on the power of your speakers .
4. Adjust the volume .
While striking the pads of the SP-404SX to produce sound, slowly turn the [VOLUME] knob toward the right, and adjust the
volume on the SP-404SX and on your speakers.

Turning the Power Off

1. Minimize the volume of the SP-404SX and your speakers .
2. Turn off the power of your speakers .
3. Turn the SP-404SX's [POWER] switch OFF .
9