Recording Samples- Basic Operation; Step 1: Connecting Equipment - Roland SP-404SX Manual Del Usuario

Recording Samples— Basic Operation

STEP 1: Connecting Equipment

Connecting a Portable Music Player or Stereo
If you're connecting your portable music player, stereo, or CD player, use audio cables to connect your device's output jacks
(LINE OUT jacks, AUX OUT jacks, etc.) to the SP-404SX's LINE IN jacks.
Your portable music
player's output jack
Caution when making connections
• To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power
on all devices before making any connections.
• When connection cables with resistors are used, the volume level of equipment connected to the inputs (LINE IN) may be
low. If this happens, use connection cables that do not contain resistors.
16
Your stereo's LINE
OUT jacks
A record player (turntable) cannot be connected directly
to the SP-404SX. If you want to connect a record player,
you must use an audio amp that will accept a connection
from a record player, or use a phono equalizer between
the record player and the SP-404SX.
LINE IN jacks
Audio amp
or
Phono equalizer