General Information; Symbols; Manufacturer Name And Address; Authorized Operators - Calpeda MPS Serie Instrucciones De Uso

1 GENERAL INFORMATION

Before using the product carefully read the infor-
mation contained in this instruction manual, the
EN
manual should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language
in case of discrepancies in the translations.
This manual is part of the essential safety require-
ment and must be retained until the product is
finally de-commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or
their agent, specifying the type of product data
shown on the label of the machine (see 2.3
Marking)
Any changes, alterations or modifications made to
the product or part of it, not authorized by the
manufacturer, will revoke the "CE declaration"
and warranty.
This appliance should not be ope-
rated by children younger than 8
years, people with reduced physi-
cal, sensory or mental capacities,
or inexperienced people who are
not familiar with the product,
unless they are given close super-
vision or instructions on how to
use it safely and are made aware
by a responsible person of the
dangers its use might entail.
Children must not play with the
appliance.
It is the user's responsibility to
clean and maintain the applian-
ce. Children should never clean
or maintain it unless they are
given supervision.
Do not use in ponds, tanks or
swimming pools or where people
may enter or come into contact
with the water.
Read carefully the installation
section which sets forth:
- The maximum permissible
structural working pressure
(chapter 3.1).
- The type and section of the
power cable (chapter 6.5).
- The type of electrical protection
to be installed (chapter 6.5).
Page 12 / 96

1.1 Symbols

To improve the understanding of the manual,
below are indicated the symbols used with the
related meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine
or compromise personnel safety.
Notes and warnings for the correct
i
management of the machine and its parts.
Operations that could be performed by the
final user. After carefully reading of the
instructions, is responsible for maintenance
under normal conditions. They are authorized
to affect standard maintenance operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed
by a qualified technician. Specialized
technician able to install the device, under
normal conditions,
"maintenance", and allowed to do electrical
and mechanical
maintenance. They must be capable of
executing simple electrical and mechanical
operations related to the maintenance of
the device.
Indicates that it is mandatory to use
individual protection devices.
Operations that must be done with the
OFF
device switched off and disconnected from
the power supply.
Operations that must be done with the
ON
device switched on.

1.2 Manufacturer name and address

Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it

1.3 Authorized operators

The product is intended for use by expert opera-
tors divided into end users and specialized techni-
cians. (see the symbols above).
It's forbidden, for the end user, carry out
i
operations which must be done only by
MPS-MXS Rev. 18 - Operating Instructions
working during
interventions for