Muffler Installation - Yamaha EF3000iSE Manual De Servicio

MUFFLER INSTALLATION

1. Install:
• Spark arrester
NOTE:
To install the spark arrester, align the projec-
tion a on the spark arrester with the hole b in
the muffler.
SWL3190J
2. Install:
• Muffler cap 1
NOTE:
To install the muffler cap, align the slit in the
muffler cap with the projection c on the muf-
fler as shown in the illustration.
SWL3200J
3. Install:
• Muffler band
NOTE:
Tighten the muffler band at the angle d shown
in the illustration. Make sure that the muffler
band opening and muffler cap slit are not cov-
ering the hole b and that the muffler cap has
not come out.
SWL3210J
d 30 ~ 60°
Muffler band:
4. Install:
• Muffler
NOTE:
Finger tighten the muffler nut 1 and muffler
bolt 2, and then tighten them to the specified
torques, respectively.
Muffler nut:
Muffler bolt:
SWL3220J
3-20
ENG
MUFFLER
3.5 Nm (0.35 m · kg, 2.5 ft · lb)
7.0 Nm (0.7 m · kg, 5.1 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)