Yamaha EF3000iSE Manual De Servicio página 132

GENERATOR
3. Install:
• Stator coil assembly bolts 2
Stator coil assembly bolts:
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible though the holes in
SWL3280J the rotor, and then install the bolts 2.
4. Tighten:
• Washer
• Magneto rotor nut 1
Magneto rotor nut:
NOTE:
Tighten the magneto rotor nut 1 using the
SWL3240J
sheave holder 2.
Sheave holder:
Rotor assembly holder:
3-24
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
65 Nm (6.5 m · kg, 47 ft · lb)
YS-01880-A, 90890-01701
(commercially available)