6.1 Donning the prosthesis
1) Apply the liner to the residual limb so that the distal end is aligned with
the longitudinal axis of the residual limb. Unroll the liner onto the residual
limb so that it has no wrinkles, without shifting the soft tissue.
2) Slide into the prosthetic socket with the liner. The magnets in the piston
of the Dynamic Vacuum System connect to the metallic counter-piece in
the liner.
3) Unroll the sealing sleeve over the prosthetic socket onto the thigh.
6.2 Doffing the prosthesis
1) Unroll the sealing sleeve from the thigh onto the prosthetic socket.
2) Doff the residual limb and liner out of the prosthetic socket.
7 Cleaning
CAUTION
Reuse on other persons and improper cleaning
Skin irritation, formation of eczema or infections due to contamination with
germs
► The product may be used by one person only.
► Clean the product regularly.
Dirt in the prosthetic socket or on the liner can impair the function of the
Dynamic Vacuum System.
1) Rinse the product with clear fresh water.
2) Dry the product with a soft cloth.
3) Allow to air dry in order to remove residual moisture.
8 Maintenance
► A visual inspection and functional test of the prosthetic components
should be performed after the first 30 days of use.
► Inspect the entire prosthesis for wear during normal consultations.
► Conduct annual safety inspections.
► To lubricate the cylinder or piston seal, use Polylub GLY 801.
9 Legal information
All legal conditions are subject to the respective national laws of the country
of use and may vary accordingly.
23