When Making Maintenance In The Machine - JF 2 Serie Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - HARVESTER JF C40 C60 and C120 SERIES 2
2.15- Be aware of the correct operation and
maintenance of the machine. Before using it for the first
time, show this manual and instruct the people that is
going to operate the machine.
2.16- Always keep the machine in perfect preserving
conditions.
2.17- Couple the machine to the tractor on a flat and
even place, making the procedure easier and safer.
2.18- In narrow passages, make sure there is enough
width to pass without any interference.
2.19- Never stay in front of or put your hands in the
outlet chute when the machine is turned on.
2.20- Never transport people or other objects on the
machine.
2.21- Always use suitable safety equipment for
machine operation or maintenance.
Protecting gloves
Ear plugs
Goggles
Safety shoes
Proper clothes

When making maintenance in the machine

1- The machine must be turned off and disconnected from the tractor for any type of
maintenance and lubrication.
2- Observe the right types and amounts of the recommended lubricants to lubricate the
different components.
Machine transport on roads and streets
Notes:
Machine transport with the tractor must not be done on roads and streets. Such
practice must be limited to inside the farm properties and rural zones.
Refer to the traffic department for regulations and laws in your region about the
possibility of transporting the machine with the tractor on certain parts of the roads.
Request guidance, authorizations and written procedures.
Always operate the tractor in compatible speeds according to the ground or roads.
2
3
1
4
5
9