Taking Off The Helmet 90 J; Before Every Journey; Checking The Helmet; Checking The Chinstrap - SCHUBERTH E1 Manual De Usuario

D. PUTTING ON THE HELMET AND TAKING IT OFF
2. TAKING OFF THE HELMET
1. Open and lock the chin bar. Make sure the sun visor is retracted into
the helmet shell.
2. Open the chinstrap.
3. Undo the Velcro of the chinstrap comfort pad.
4. Grasp the ends of the chinstrap and pull the chinstrap ends apart.
5. The helmet can now be removed easily from the head.
6. Close the chin bar.
Tip:
To avoid scratching any objects you might place the helmet on, we
recommend closing the chin-strap after you have taken the helmet off.
90
E. BEFORE EVERY JOURNEY
For your safety, check the following points before every journey:

1. CHECKING THE HELMET

Check the helmet regularly for damage. Small superficial scratches will not
impair the protective function of your helmet. In the case of more serious
damage (cracks, dents, flaking and cracking paint, etc.), the helmet should
no longer be used.
Note:
If you have lost a significant amount of weight, you should check
that your helmet is still the right size for you.

2. CHECKING THE CHINSTRAP

(WITH HELMET ON AND FASTENED)
1. Check that the chinstrap passes under your chin.
2. Slip your index finger under the chinstrap and pull.
If the chinstrap is loose under the chin, it is too long and needs to be
tightened.
If the chinstrap loosens when you pull it, it is not properly fastened.
Undo the chinstrap completely and try fastening it again. Repeat the
test.
3. If you are unable to fasten the chinstrap so that it fits snugly against
the chin, check that your helmet is still the right size for you.
Note:
Repeat the test after each adjustment.
Caution:
Never ride with the chinstrap unfastened or incorrectly adjusted.
The chinstrap should fit correctly and should not become loose when
pulled. The fastener is not correctly closed if the chinstrap becomes
loose when pulled.
EN
91