SCHUBERTH J1 Manual Del Usuario página 36

D. THE HELMET
Operation
Operate the sun visor by means of the slide positioned on the left side.
This is easy to do even when wearing gloves. Moving the slide forward
lowers the visor, moving it back makes the visor disappear into the
inner shell of the helmet. The sun visor snaps in place at both end
positions to prevent it moving up or down as a result of vibration on
bumpy stretches.
The sun visor can be operated
irrespective of the position
of the main visor.
Note:
Only use the slide to operate the sun visor.
Caution:
Never ride in darkness or conditions of poor visibility with the sun
visor down. Always raise the sun visor before entering a tunnel.
Caution:
Riding without the visor or with an open visor can result in injury
to the eyes and face through stones, dust, insects and other
flying objects. The sun visor, when lowered, will provide a certain
amount of protection from light impact from stones or insects
but cannot protect from all hazards.
72
REPLACI N G THE SUN VI SO R
The sun visor can be replaced without tools.
Tip:
To avoid fingerprints and scratches, use a soft, clean cloth (we
recommend a microfibre cloth) to hold the sun visor when
removing or fitting it.
Removing the sun visor
1. Pivot the sun visor down.
2. Firstly pull the sun visor down far enough so that you can see its
top edge, then pull the ends of the visor from its mounting at left
and right.
73