Adjusting The Shock Absorber (Enduro/Motard/ Motard Sport/Track); Adjusting The Compression And Extension Brake (Racing); Adjusting The Spring Preload (Enduro/Racing) - Beta RR 50 CC Serie Manual Del Usuario

3
A
EN
B
ENDURO
RACING
ADJUSTING THE SHOCK
ABSORBER (ENDURO/MOTARD/
MOTARD SPORT/TRACK)
The motorcycle has two different positions
for the upper attachment of the shock
absorber.
Position A: standard position.
Position B: lowered position. The height of
the motorcycle reduces by 30 mm.
WARNING: locknuts with plastic ring are
for single use only. Once removed it must
be replaced.
ADJUSTING THE
COMPRESSION AND
EXTENSION BRAKE
(RACING)
Adjuster (D), located near the lower shock
absorber mount, is used to adjust the
hydraulic damping during the rebound
(return) phase.
Knob (C), located on the expansion tank
of the shock absorber, adjusts the hydraulic
damping during the compression phase.
Turning knobs (D) and (C) clockwise in-
creases the damping action; conversely,
turning them anticlockwise decreases it.
For standard setting, refer to page 12.
ADJUSTING THE SPRING
PRELOAD (ENDURO/
RACING)
To adjust the spring preload, use the pro-
cedure described below.
Rotate ring clockwise to increase the
spring preload (and consequently the
shock absorber preload) or anticlockwise
to decrease it.
In the event of any malfunction, contact
our authorized customer service network.
38