SFS isoweld 3000 Instrucciones De Operación página 35

Now take the generator and position it as shown (left). attach the power cord
connector to the generator (right) paying attention to orientation as it will only go
on one way.
Next, rotate the generator counter clockwise 90° and tilt up into place as shown
(left). While holding the orange shell up, lean the generator back into the frame
ensuring it is seated fully against the back into the frame and down into the
bottom.
Now, slip the rubber retainer over the top of the generator body (left). It should
be pushed all the way down against the heat sink (right).
35