SFS isoweld 3000 Instrucciones De Operación página 37

Ocultar thumbs Ver también para isoweld 3000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Service
For technical information, please contact SFS tool service.
Warranty
The isoweld
3000 and isoweld
®
within 30 days of purchase. To protect your investment and
register the tool, go online at:
www.sfsconstructionna.com/toolregistration/
1. This induction welding tool has been carefully checked, tested and subjected
to strict quality control.
2. We warrant the rectification, free of charge, of defects on the induction
welding tool that occur within 24 months of the date of sale or 200,000 welds
to the end user and that are due to a material or manufacturing fault. Individual
special regulations apply to the conditions of the warranty in some countries.
We reserve the right to rework defective parts or replace them with new ones.
The ownership of the replaced parts is transferred to us.
3. Improper usage or handling, as well as the opening of the tool by unauthorised
repair centers, will render void any claims under the warranty. The warranty
excludes the following: damage caused by penetration of water or other
liquids, a cut or damaged cable, damage to the electronics and mechanical
damage caused by overloading. Likewise excluded are wear parts such as the
induction coil, gliding foil etc.
4. Claims under the warranty can only be accepted if defects (as well as
transport damage) are notified without delay. The statute of limitations is not
automatically extended by the provision of service under the warranty.
5. In order to make a claim under the warranty, the took registration must be on
record, as noted above. To make the claim, contact SFS at:
US: 1-800-DEKFAST (335-3278)
6. Any further claims by the purchaser – in particular the right to rescission,
price reduction or claims for damages – are excluded due to the warranty
obligations undertaken by us, as far as permitted by the law.
7 . The purchaser is entitled, at the purchaser's choice, to a price reduction
(reduction of the purchase price) or rescission (annulment of the contract of
purchase), if we are unable to rectify within a reasonable period any defects
that may occur.
Backpack must be registered
®
37

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para SFS isoweld 3000

Este manual también es adecuado para:

Isoweld backpack

Tabla de contenido