SFS isoweld 3000 Instrucciones De Operación página 47

Fast and exact positioning of the magnet is a prerequisite for good
welds.
The magnet must not be rotated during or after positioning if there is
contact with the waterproof membrane. If this instruction is not followed,
the waterproof membrane may be damaged.
Clean magnets from debris on a regular basis to prevent membrane
damage.
• Ensure that all fastening points have been properly welded.
• Should you be uncertain about whether some welds have completed
properly, SFS recommends testing with a commercially available suction
pad.
See also isoweld ® operating instructions.
47