John Bean Balco 9460 Manual De Operador página 88

Symbols and meaning:
Readings and
operator prompts.
Switch over between
•
optimisation and
minimisation
Flashing: choose
M
minimisation
Return key:
Start of optimisation/
minimisation program;
Input of valve
position.
Fine key:
In the optimisation/
minimisation program
fine
– change-over from
main program.
STOP key:
Interruption of mini-
misation program;
stop
Return to balancing
program.
Start measuring run
by closing the wheel
guard.
Start
Measuring run of tyre/
rim assembly.
Single mark.
To be provided onthe
right tyre side when
wheel is indexed ac-
cording to readings.
Double mark.
To be provided on the
right or left tyre side
(as indicated) when
wheel is indexed ac-
cording to readings.
Mount tyre on rim or
readjust on rim.
Adjust tyre mark to
coincide with rim valve
position.
Turn tyre over on rim.
Adjust tyre mark to
coincide with rim valve
position.
Balance wheel
according to readings.
Un.5 – H1: It is not
recommended, but
Un.5
possible, to continue
minimisation.
H0: Minimisation
cannot be improved;
press STOP key;
balance wheel.
Error code E 8:
Valve position wasnot
entered.
Error code E 9:
An error was made in
minimisation.
Press STOP key;
repeat minimisation.
Sequence of operations and readings
•
M
fine
Un.3
Un.4
Start
Un.5
Un.5
Un.6
Start
Minimisation program
stop
Un.7
Un.7
fine
stop
Un.8
Start
Un.7
stop
Un.8
Start
stop