Error Codes List; Service Information; Replacement Parts; Accessories - OHAUS CD-11 Manual De Instrucciones

CD-11 Indicator

5.2 Error Codes List

The following list describes the various error codes and which can appear on the display and the suggested
remedy.
LoBat Indicates weak batteries. Approximately 20 minutes of operating time remain.
Error 1 Indicates an overload condition.
Error 2 Indicates an underload condition.
Error 7 EEPROM data incorrect.
Error 14 Zero exceeds ZERO% and cannot be zeroed.
Err 21 Calibration data does not match current full scale, Grad and Cal Point settings. Settings must
be restored or the Indicator must be recalibrated using the current settings.

5.3 Service Information

If the Troubleshooting section does not resolve or describe your problem, you will need to contact an authorized
Ohaus Service Agent. For Service assistance in the United States, please call Aftermarket, Ohaus Corporation toll-
free at (800) 526-0659. An Ohaus Product Service Specialist will be available to help you.

5.4 Replacement parts

Description
AC Adapter North America, 100-132 V ac, 60 Hz
AC Adapter Continental Europe, 196-253 V ac, 50 Hz
AC Adapter UK, 196-264 V ac, 50 Hz

5.5 Accessories

Description
Adjustable Column
Wall Mounting Bracket
Scale Base Mounting Plate
RS232 Interface Cable/Printer SF42
RS232 Interface Cable/blunt end
RS232 Interface Cable/PC 25 Pin
RS232 Interface Cable/PC 9 Pin
Printer

5.6 Technical Data

Materials
Housing GEC6200 Cycoloy plastic.
Keypad/display overlay polyester
Ambient conditions
The technical data is valid under the following ambient conditions:
Ambient temperature
Relative humidity
Height above sea level
-10°C to 40°C/ 14°F to104°F
10%.......95%, noncondensing
up to 4000m
EN-35
Ohaus Part No.
80500435
80500436
80500437
Ohaus Part No.
71135127
71152686
80250686
80500537
80500430
80500431
80500433
SF42