Adjusting The Seat Position - RIESE & MUELLER Charger Manual De Instrucciones

ADJUSTING THE SEAT POSITION

DANGER!
Setting the E-Bike to suit your
needs requires experience, suit-
able tools and manual skills. All
adjustments should therefore be
made by a specialist dealer.
DANGER!
Never ride your bike if the seat-
post has been pulled out beyond
the mark on the shaft. The mark
mustn't be visible above the upper
edge of the seat tube. Otherwise
the post could break or the frame
could be damaged. After poten-
tially shortening the seatpost a
minimum of 80 mm has to remain
in the frame.
DANGER!
When changing the saddle, make
sure that the seatpost is designed
for a saddle rail with a diameter
of 7-8 mm. Any other type of rail
can cause component failure and
a crash.
DANGER!
Adjusting the height of A-Headset
stems requires changes to be
made to the headset. Should this
work be carried incorrectly it
poses a high danger of accidents.
For this reason you should get
your specialist dealer to perform
this task.
EN-15