Bosch Drive - RIESE & MUELLER Charger Manual De Instrucciones

BOSCH DRIVE

All Riese & Müller models are fitted with a
Bosch drive. Carefully read the separately
supplied Bosch instructions and the informa-
tion about handling the battery and charger.
DANGER!
In order for your E-Bike's electric
drive to operate correctly and
safely, it needs to be checked by
your specialist dealer as part
of an inspection. If you notice
damages to the electric system,
immediately remove the bat-
tery from the E-Bike and take
it to your specialist dealer for
a repair. Also get in touch with
your specialist dealer if you have
questions, problems or notice a
fault. Lack of expertise can cause
serious accidents.
NOTE!
Please note that your E-Bike will not
produce any light if you are riding
without a battery or with the system
turned off.
EN-34
DANGER!
Remove the battery before trans-
porting your E-Bike or carrying
out any assembly, maintenance
or other work on it. The uninten-
tional activation of the electric
system can cause injuries.
NOTE!
Observe the instructions on the
charger before starting to charge the
battery. Only use the original charger
or one that has been approved by
the manufacturer. Once the battery
is fully charged, remove it from the
charger and unplug it.
DANGER!
Do not use the charger in a flam-
mable environment. For safety
reasons, the charger and the bat-
tery need to be placed on a dry
and non-flammable surface.