Orved N Serie Manual De Uso página 27

MOD. VGP60N
PHASE DESCRIPTION
1
Operate the calibration by pushing
the blu TAR button, then close the
heating station.
WARNING!
Sensor calibration must be repeated each time the machine is moved to a place with a different altitu-
de.
11) VGP25N: Activate / deactivate the buzzer.
To activate or deactivate the buzzer, proceed as follows:
MOD. VGP25N
PHASE DESCRIPTION
1 Turn on the machine using the "ON/OFF" main switch.
2 Press the " STOP" button for 4 seconds: a long beep signals the buzzer is activated,
a short beep signals the butter is deactivated.
Rev. 08 - 04/2017 - Cod. 1500160 - Instruction manual VGP25N / VGP60N
INSTALLATION AND PREPARATION
DISPLAY kEY
TAR
kEY
27