Robuschi ROBOX evolution Manual De Uso página 61

MODBUS data description
Identification and counters
Block 0: Model, release sw, work. hour and maintenance
Addr Type Size
0x0000 char[10] 10
0x0005 byte[10] 10
0x000A word 2
0x000B word 2
0x000C word 2
0x000D word 2
0x000E ulong 4
0x0010 ulong 4
0x0012 ulong 4
0x0014 ulong 4
0x0016 ulong 4
0x0018 ulong 4
0x001A ulong 4
Parameters
Block 1: General
Addr Type Size Name
0x0100 word 2 P01
0x0101 word 2 P02
0x0102 word 2 P03
0x0103 long 4 DummyA
0x0105 long 4 DummyB
0x0107 long 4 DummyC
0x0109 word 2 P04
0x010A word 2 P05
0x010B word 2 P09
0x010C word 2 P06
0x010D word 2 P08
0x010E word 2 P10
0x010F word 2 DUMMY1
0x0110 char[10] 10 MATRICOLA
0x0115 int 2 P07
Name Notes
MATRICOLA Serial number (ref. to menu 10)
DUMMY0 Not used
MODEL For Sentinel Pro returned data is 0x6000
This data is useful to identificate possible variation or future hardware personalization.
SWREL Firmware release for I/O board
MSB = major release
LSB= minor release
PROTREL Reported description refers to returned data 0x0000
This is useful to handle possible future modification in MODBUS data description
which requires a different interpretation for data themselves.
SWRELFRONT Firmware release for front panel
MSB = major release
LSB= minor release
S0 Operating hours [h]
S1 Oil change counter [h]
S2 Oil filter counter [h]
S3 Air fileter counter [h]
S4 Belt replacement counter [h]
S5 Bearing replacement counter [h]
S6 Compressor overhaul counter [h]
Notes
Language set-up (ref. to menu 5.2.3.3):
0=Italian,
1=Francais,
2=English
3=German
4=Spanish
5=Portoguese
Visualisation mode set-up (ref. to menu 5.2.3.3):
0=S.I.(mbar,bar,C°)
1=USA(Hg,psi,F°)
Legal time automatic selection (ref. to menu 5.2.3.3):
0=Solar time
1=Legal time
Not used
Not used
Not used
Oil level kit (ref. to menu 5.2.3.9):
0=IN5 e IN6 are not active
1=Only IN5is active
2=Both IN5 e IN6 are active
Compressor overhaul (ref. to menu 5.2.3.9), handling of parameter 6-M6 and the related
maintenance alarm.:
0=NO
1=YES
Lubrication (ref. to menu 5.2.3.9):
0=forced lubrication
1=splash lubrication
2=blower
Fan motor OFF Timer [min] (ref. to menu 5.2.3. 9)
Oil level alarm delay [s] (ref. to menu 5.2.3.9)
Operation type (vedi menu 5.2.3.9):
0=Pressure
1=Vacuum
Not used
Sentinel Serial number (ref. menu 5.2.3.10)
Offset PWM [V*100] (ref. menu 5.2.3.9)
61
W3-0A5 12-I