Migatronic PI 200 DC HP Manual De Instrucciones página 83

Opções de disparo do arco para
4 tempos (automática)
Permite defenir 6 tipos diferentes de disparo do
arco, assim como a sua finalização, quando a
função 4 tempos é activada (Lift or HF). Mode 3
is called 4T-REPEAT and permits to keep the arc
active also at the end of slope down for an easier
restart of sequence. In Mode 3 the function
"Second current level" is disabled. Para
informação mais detalhada veja os diagramas
seguintes. Seleccione um valor no intervalo 0...5
(1=parâmetro de fábrica).
Note: The start current is disabled in
and if slope-up period is set at 0.
Controlo dinâmico da oxidação
(para soldadura AC).
0 = desactivado
1 = activado (valor de fábrica)
Makes it possible to control how the control unit
on the handle is used when torch adjustment is
enabled (
0 = Setting the current reference (factory
1 = Enabling/disabling TIG-A-Tack
2 = Up/Down module
Learn more about TIG Ergo torches at
http://migatronic.com
Todas as configurações alteradas em cima não serão
modificados através de Reset.
,
83
Torch Remote Control
Applies to software versions as of 1.10
).
default).
(the TIG-A-Tack button is disabled).
The control unit is handled as follows:
Steps 1-3: TIG-A-Tack is
enabled
Steps 4-7: The trigger is
disabled
Steps 8-10: TIG-A-Tack is
disabled
Trigger
Enabling/Disabling
TIG-A-Tack
* Keep pressed for
constant increase/reduction
Trigger