Scope Of Delivery (Figure A); Technical Data; Correct Use; Safety Notes - Crivit 279806 Instrucciones De Uso

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.

Scope of delivery (figure A)

2 x Push Up Grips (1)
2 x Mounts, flat (2)
2 x Mounts, curved (3)
1 x Instructions for use

Technical data

Maximum user weight: 110kg

Correct use

This article provides a better and more joint-
friendly movement sequence for push-up
exercises. The article was designed for use in the
private area and is not suitable for medical and
commercial purposes.

Safety notes

• The article may only be used under adult
supervision and may not be used as a toy.
• Consult your doctor before beginning training.
Please ensure that you are in suitable health
for the training.
• Remember to always warm up before training
and train in accordance with your current
level of performance. Severe injury is possible
if you exert yourself too much or overtrain. If
you experience complaints, weakness or
fatigue discontinue training immediately and
contact your doctor.
• Keep the operating instructions and the exer
cise information at hand at all times.
• Pregnant women should only do the training
following discussion with their doctor.
• There must be a free area of approx. 0.6m
around the training area (figure K).
• Only train on a flat and non-slip surface.
• Do not use the article in the vicinity of stairs or
steps.
Special care –
Risk of injury for children!
• Do not allow children to use this article
without supervision. Point out the correct use
of the training instrument and maintain super-
vision. Only allow use if the mental and phy
sical development of the children allow this.
This article is not suitable for use as a toy.

Risks from wear

• The article may only be used in perfect
condition. Examine the article for damage or
wear before each use. The safety of the article
can only be assured if it examined regularly
for damage and wear. Do not use the article if
it is damaged.
Assembly of the Push Up
Grips
1. Pick up the article by the curved mounts (3)
and pull the article apart in the middle.
2. Lay the two halves of the article down with the
curved surface on the floor.
3. Insert the push-up trainers into the article
(figure B).

Dismantling

1. Push on the point on the inside of the push-up
handles (1) and pull them out of the article
(figure B).
2. Lay the two halves of the article down with
the curved mount surface facing downward
and place the push-up trainer handles (1)
into the hollows in one half of the article that
are designed for this purpose (figure B).
3. Press the article halves together. The locking
of the closures must be audible. Make sure
that the closure devices are placed correctly
(figure A).
GB/MT 25