Service; Guarantee - Gymna VACO 200 Manual De Usuario

6.1.4 Remove the contamination from the vacuum electrodes
1. Clean the vacuum electrodes. See §5.2.2.
2. Use steel wool or sandpaper for metal with fine grains ('P 400' or
higher) to remove the contamination.
3. Replace the vacuum electrodes if the contamination is still present.
6.2

Service

Only a technician authorised by GymnaUniphy N.V. may open
the equipment or the accessories to perform repairs. The
equipment does not contain any components that may be
replaced by the user.
Service and guarantee are provided by your local GymnaUniphy dealer.
The conditions of delivery of your local GymnaUniphy dealer apply.
If you have qualified technical personnel that are authorised by
GymnaUniphy to perform repairs, your dealer can provide diagrams,
spare parts lists, calibration instructions, spare parts and other
information on request, for a fee.
6.3

Guarantee

GymnaUniphy and the local GymnaUniphy dealer declares itself to be
solely responsible for the correct operation when:
•
all repairs, modifications, extensions or adjustments are performed
by authorised people.
•
the electrical installation of the relevant area meets the applicable
legal regulations.
•
the equipment is only used by suitably qualified people, according to
these user instructions.
•
the equipment is used for the purpose for which it is designed.
•
maintenance of the device is regularly performed in the way
prescribed. See §5.
•
the technical life time of the equipment and the accessories is not
exceeded.
•
the legal regulations with regard to the use of the equipment have
been observed.
The guarantee period for the equipment is 2 (two) years, beginning on
the date of purchase. The date on the purchase invoice acts as proof.
This guarantee covers all material and production faults. Consumables,
such as sponges, are excluded.
Vaco 200
21