Cordivari PUFFER VC VT Instrucciones De Uso página 12

4. Connections
The cylinder reports on its label the generic use of its connections.
Therefore it is up to the heating system designer/installer
to evaluate, in respect of the laws and regulation in force at the
installation place, the best possible plant scheme, in compliance
with the limits (pressure and temperature), declared by the
manufacturer.
When installing, it is highly recommended to provide the sanitary
circuit with connections (shut-off dhw valves, Valves with hose
barb and tap, for the preliminary and periodic cleaning of the
heat exchanger.
5. Operating conditions
Respect the limits of pressure and temperature indicated on the
cylinder label plate.
6. Waste disposal
At the end of the product's technical life, its
metallic components must be handed over
to operators authorised for collecting metallic
materials
components must be given to operators
authorised for their waste disposal. If disposed
by the fi nal user, the products must be managed
as urban waste, and therefore complying with
regulations in force in that place In any case they
must not be treated as household waste
BS_100_Rev_1
for recycling. The non-metallic
GB
CORDIVARI - 10