Safety Instructions - SATA SATAjet 3000 K RP Instrucciones De Servicio

SATAjet 3000 K (RP/HVLP) Operating Instructions
DIN EN ISO 12100:2011
Machine safety, general requirements
DIN EN 1953:2013
Atomizing and spraying equipment for coating materials – Safety require-
ments
DIN 31000:2011
"General principles for the safe design of products"

2. Safety Instructions

Read and observe all of the instructions below. Failure to observe or in-
correct observance can lead to malfunctions and severe injury.
2.1. Requirements for personnel
This paint spray gun is intended for use only by skilled personnel with
appropriate training who have read and understood these operating in-
structions completely. Use of paint spray guns by individuals with impaired
reactions as a result of dugs, alcohol, medications or for other reasons is
prohibited.
2.2. Personal Protection Equipment
When using, cleaning and maintaining the paint spray gun, always wear
approved respiratory protection, eye protection and ear protection as well
as suitable protective gloves, work clothing and protective shoes.
2.3. Use In Explosive Areas
Danger!
Risk of death from exploding paint spray gun
Use of the paint spray gun in explosive atmospheres classified as Ex
Zone 0 can result in an explosion.
→ Never use the paint spray gun in explosive atmospheres classified as
Ex Zone 0.
The spray gun is permitted for use / storage in explosion hazard areas of
ex-zone 1 and 2. The product labelling must be adhered to.
2.4. Safety Instructions
Technical condition
■ Never operate the paint spray gun if damaged or if parts are missing.
■ If damaged, immediately discontinue using the paint spray gun, discon-
nect it from the compressed air circuit and bleed completely.
US
515