Husqvarna TC 250 2009 Manual De Uso página 87

MUM1-250_310_450_510_2009_GB
REPLACEMENT OF COOLING FLUID
Place a vessel on the L.H. side of the cylinder, under the Piping (1).
Remove the exhaust pipe (a). Loosen the pipe strap (2) of the
piping (1), take the pipe off the fitting that secures it to the
engine, then SLOWLY open the R.H. radiator cap (3); slope the
motorcycle on the left side to drain the coolant easily in the
vessel.
Once over, fit the pipe back in (1) and secure it with the strap (2).
Fit the exhaust pipe back in.
Pour the necessary quantity of coolant in the radiator then
warm up the engine in order to eliminate any possible air bub-
ble.
18-11-2008 11:09 Pagina 21
Periodically check the connecting hoses (see "Periodical main-
tenance card"): this will avoid coolant leakages and conse-
quent engine seizure: If hoses (A) show cracks, swelling or
hardenings due to sheats desiccation, their replacement shall
be advisable.
Check the correct tightening of the clamps (B).
a
1
2
B
3
A
A
A
B
21