Preassembly Instructions; Storage And Transport; Conditions For Use; Access To Premises - Salva IVERPAN FC-18 Instrucciones De Usuario

4. Preassembly instructions

4.1. Storage and transport

4.2. Conditions for use

4.3. Access to premises

Usuario_Iverpan2006_(c-f-i)011210
The Iverpan is sent disassembled or fully assembled on a wo-
oden platform.
The Iverpan should be transported in a completely closed ve-
hicle and it should never be left outdoor.
The Iverpan has been manufactured to be installed indoor. It
is not made to work outdoor. Se deben evitar exposiciones a
eventuales caídas de agua o a rayos solares directos.
It is essential that the place where the Iverpan is going to be
installed is provided with as much ventilation as possible. For
good performance, the workshop room temperature around
the panel must nos exceed 30ºC.
When carrying the Iverpan into the room it must not be inclined
more than 45%.
• The floor on which the Iverpan is to be positioned
should be perfectly flat and levelled.
The Iverpan is already mounted when shipped, so a minimum
passage is required according to the sizes indicated on the
feature table point 3. The Iverpan gross weight is indicated on
the feature table point 3.
-87-
IMPORTANT
salva