Die Heads And Dies; Mounting Machine To Stand - RIDGID 1224 Manual De Uso

1224 Threading Machine

Die Heads and Dies

Capacity
Die Head
Pipe
Model No.
" - 2"
1 /
711 NPT
4
" - 4"
2 1 /
714 NPT
2
" - 2"
1 /
713 NPT
4
" - 2"
1 /
911 BSPT
4
" - 4"
2 1 /
914 BSPT
2
" - 2"
1 /
913 BSPT
4
541
542
American National Series (High Speed) Dies (8 T.P.I. 1
General purpose Acme and Metric dies for 541 and 542 bolt die heads available on request.
20.25
Figure 2 – 1224 Machine Dimensions
Machine Mounting and
Transporting
WARNING
To prevent serious injury, proper mounting of the
Threading Machine is required. The following pro-
cedures should be followed:
Sets of Dies
Bolt Pipe Bolt
" - 2"
1 / 3 16 UNC
4
14 UNF
1
3
" - 2"
1 / 3 16 BSW
4
1
3
" - 1"
1 /
4
10 UNC
" - 2"
6 UNC
1 1 /
8
4 UNF
" - 2 ") (12 T.P.I.
1 / 1 /
8 2
43.69
Ridge Tool Company
Threads
Special Notes
R.H L.H.
X Self-opening die head
X Self-opening die head
Quick-opening die head
X
X Self-opening die head
X Self-opening die head
X Quick-opening die head
Alloy or high speed dies, UNC or UNF
X X
BSW or BSF right hand or left hand
X X
Alloy or high speed dies, UNC or UNF
BSW or BSF right hand or left hand
" - 2 "), and (16 T.P.I. " - 2
1 / 1 / 13 /
2 2 16
18.42

Mounting Machine To Stand

1. The machine is designed to mount on the three uni-
versal stands listed below.
Machine Stands
Model No. Description
100 Universal Leg & Tray Stand
150 Universal Wheel & Tray Stand
200 Universal Wheel & Cabinet Stand
2. Parts diagram and parts list for the stands are in-
cluded in the 1224 Parts List.
3. Assemble stand with "inside" decals located towards
the inside of the stand (Figure 3).
4. Insert stand stop tabs into bottom of the legs as
shown in the detail drawing. Insert the four spacers
between the legs. Use the four (4)
bolts to secure the legs to the cross-member. Adjust
the two halves of the stand stop to the proper distance
")
1 /
2
11.92
15.50
28.84
" – 16 x 4" hex
/
3
8
5