Jacking The Machine; Transporting The Machine - Nilfisk-Advance Captor 4300B Instrucciones De Uso

HOPPER SAFETY SUPPORT
WARNING!
Make sure the Hopper Safety Support (HH) is in place whenever attempting to do any maintenance work under or near the
raised hopper. The Hopper Safety Support (HH) holds the hopper in the raised position to allow work to be performed under the
hopper. NEVER rely on the machine's hydraulic components to safely support the hopper.

JACKING THE MACHINE

CAUTION!
Never work under a machine without safety stands or blocks to support the machine.
• When jacking the machine, do so at designated locations (Do Not jack on the hopper) - see jacking locations (11)

TRANSPORTING THE MACHINE

CAUTION!
Before transporting the machine on an open truck or trailer, make sure that . . .
• All access doors are latched securely.
• The machine is tied down securely - see tie-down locations (4).
• The machine parking brake is set.
TOWING OR PUSHING A DISABLED MACHINE
CAUTION!
If the machine must be towed or pushed, make sure the Main Power Switch (CC) is in the OFF position and do not move the
machine faster than a normal walking pace (2-3 miles per hour) and for short distances only. If the machine is to be moved long
distances the rear drive wheel needs to be raised off the fl oor and placed on a suitable transport dolly.
FORM NO. 56041577 - Captor
ENGLISH / A-7
4300B, 4800B / CR 1100B, 1200B - A-7
™