Pipe Feeder (Base And Extension Unit, Mobile Workstation); Folding Workbench - Orbitalum GF 4 AVM Traducción Del Manual De Instrucciones Original

enGLISH
Set-up and assembly
8.1.3

Pipe feeder (base and extension unit, mobile workstation)

When using the Orbitalum Tools pipe feeder base unit, the pipe cutter is directly fitted to the mounting plate of the base unit
without special accessories (special accessories, code no. 790 068 051).
WARnInG!
Pipe feeder base unit (Code 790 068 051)
8.1.4

Folding workbench

Can only be used for saws with field of application up to 4.5".
Please use a pipe feeder (Code 790 068 051) or the mobile workstation (Code 790 068 071) as of 6".
WARnInG!
78
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Falling objects or tilting and bending
tubes!
Irreversible crushing.
X Wear safety shoes (in accordance with EN
ISO 20345, at least S1).
X Support pipes whose length exceeds 1 m
with a pipe support or a pipe feeder or
extension unit.
Pipe feeder extension unit (Code 790 068 061)
The pipe cutters are top-heavy and can
cause a workbench that is not load-bear-
ing and not secure against tilting to tilt!
Irreversible crushing and material damage.
X Mount pipe cutters only on stable,
load-bearing and non-tilting workbenches.
X Mount GF 6 only on the short side of the
folding workbench (Code 790 052 030).
X Do not mount RA 8 and RA 12 on the folding
workbench (Code 790 052 030).
GF 4, GF 6, RA 8, RA 12 (AVM/MVM)
Mobile Workstation (Code 790 068 071)
Folding workbench (Code 790 052 030)
[REV. 20190510] OC_GF_RA_BA_790142765_00__INH-02_EN