Kichler 35208 Manual De Instrucciones página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ASSEMBLY INSTRUCTIONS
13
F
G
13. Remove the mounting screw marked with a red dot label from the motor assembly (F) and loosen
but do not remove the other 2. Feed the wires from the motor assembly (F) through the center
hole in the light kit housing (G). Position keyhole slots around the screws and twist clockwise.
Insert the screw that you had previously removed. Tighten all screws.
NOTE: In order to prevent damage during shipping,
the light kit housing is secured with three shipping
retainers. You will need to discard these retainers
before install the light kit housing.
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0747658

Tabla de contenido