Kichler 35208 Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
1. Secure the hanger bracket (A) to the ceiling outlet
Outlet Box
1
box using hanging bracket screws and hanging
bracket washers.
Important: If attaching the fan to a sloped ceiling,
make sure open end of mounting bracket is installed
facing the roof. Do not install fan on a ceiling with a
pitch greater than 18°.
A
2. Loosen the set screws found on coupling on top of the motor assembly (F). Then remove the hair
and clevis pin that will be used on a later step.
2
Hair Pin
Safety Cable
Coupling
Clevis Pin
F
5