Installation And Adjustment; Tools; Manner Of Delivery - Vermeiren 708D Manual De Instrucciones

5. A steeper (greater) angle within the preferred zone is desirable.
6. Adjust the belt tightly according to the instructions of the strap-system manufacturer,
consistent with the user's comfort.
7. Ensure that the restraint belt connects in a straight line to the anchor point in the
vehicle and that no bends in the belt are visible, for instance at the axle of the rear
wheel.
8. Install the armrests, if desired. Make sure that belts are not twisted or held away from
the body by wheelchair components such as armrests or wheels.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren wheelchairs 708D has been designed entirely for your comfort.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.

Wrench set n° 10 to n° 19

Allen key set n° 4 to n° 5

Screwdriver Phillips head
3.2

Manner of delivery

The Vermeiren 708D shall be delivered with:

1 frame with armrests, rear and front wheels

1 pair footrests

Backrest and seat cushions

Tools

Manual

Accessories (optional)

Pump (with pneumatic tyres only)
Before use check if everything is included and that no products are damaged (example by
transport, ...).
Page 14
708D
2015-03