Sicam FALCO EVO 622 Manual Original página 50

en 50 | FALCO EVO 622/622 IT | Operation
Fig. 40: Inserting upper tire bead
6. Press the mounting column pedal to move the moun-
ting column to the rest position.
7. Press the clamping jaw pedal to release the rim.
|
1 695 101 508 2014-03-21
5.3 Inflation
Risk of injury from tires bursting
Inflating a tire to more than 3.5 bar could
cause it to burst or be ripped out of its an-
chorage.
¶
Wear ear protection.
¶
Never inflate the tire on the clamping plate
to more than 3.5 bar.
¶
Constantly observe the tire pressure on
the pressure gage to avoid over-inflation.
¶
Avoid any distractions whilst inflating.
5.3.1 Inflation with inflation hose
1. Remove the valve cap.
2. Connect the inflation hose to the tire valve.
3. Actuate the inflation valve and inflate the tire to max.
3.5 bar.
5.3.2 Inflation with inflation gun
1. Screw the valve element.
2. Connect the inflation gun to the tire valve.
3. Inflate the tire, by operating on the inflation gun until
reaching nominal pressure.
Sicam srl società unipersonale