Limit Line; Edit Limit Line - Promax AE-966 Manual De Instrucciones

USER'S MANUAL AE-966 / 967
6.2.8

Limit Line

Limit Line sets the upper and lower amplitude limit over the entire frequency
range. The limit lines can be used to detect whether the input signal level is above,
below, or within the target amplitude. The result, pass or fail, is shown at the display
bottom in real-time.
6.2.8.1

Edit Limit Line

Parameter
Editing point: Maximum 10 points for each High and Low limit line.
Frequency: 9 kHz ~ 3.0GHz per editing point.
Amplitude: Per editing point:
-130 ~ +20dBm
-83.01dBmV ~ +66.99dBmV
-23.01dBuV ~ +126.99dBuV
1. Activate
1.- Press the Limit Line key.
Limit Line
04/2016 Page 87