Remote Control; Configure Interface - Promax AE-966 Manual De Instrucciones

6.2.20

Remote Control

The equipment supports remote control which is partially based on IEEE 488.2
and SCPI standard. The command set covers most of the panel operations. Three
interfaces are available: USB slave, RS-232, and GPIB (optional).

6.2.20.1 Configure Interface

Interface type
USB slave port
configuration
RS-232C
configuration
Page 156
USB (slave): USB 1.1 or 2.0, TypeB mini, female connector.
RS-232C: D-sub 9 pin, female connector.
GPIB (optional): 24pin female connector.
No need for panel configuration: Just connect
a USB cable to the rear panel.
Type B mini, female, USB1.1/2.0
The USB icon turns On when the
connection is detected.
1.- The RS-232C configuration can be
checked from the system menu. Press the
System key.
2.- Press F3 (Serial Port).
USER'S MANUAL AE-966 / 967
System
Serial Port..
F 3
04/2016