Input Menu; Standby Mode - MACHEREY-NAGEL QUANTOFIX Relax Manual De Instrucciones

Manual QUANTOFIX

6.2.4 Input menu

You have the option to insert some data into the instrument (e.g. Date / Time).
The input-menu appears whenever you want to make such an entry.
Above the input-buttons you will find a window which shows your new entry. You
can enter upper case letters, or numbers. To switch between the options, press
the button that shows the desired form of entry (
ment is opting for capital letters. Once you make a change, the instrument re-
members your last choice. If you open the input-menu again, the former choice
is still active. For new entries touch a letter / number. To enter a different letter /
number than the first one on the button, press the button repeatedly.
You can delete an entry by pressing
your changes. If you leave the input-menu by pressing
changes will be adopted.
6.3 Stand-by mode
After three minutes idling, the instrument goes into stand-by mode and the mea-
surement slide retracts into the housing. Pressing the touch screen re-activates
the instrument and you get straight to the start screen. You can also activate the
stand-by mode ahead of time by pressing
Note: If the device is activated from the stand-by mode, it will always go to the
start screen. Any changes in menus or changes in settings that have not been
saved before the instrument went into stand-by mode will be lost.
66
Relax
®
Seq.Nr
1234
1 2 3
ABC
4 5 6
7 8 9 0
. Press
in the start screen.
Manual QUANTOFIX
®
/ ). Initially, the instru-
ABC 123
to confirm and save
, none of your
Relax EN V 1.20 / 01.14 MN