Stopping The Tractor - GOLDONI EURO Serie Manejo Y Cuidado

R = Slow
V = Fast
RM= Reverse
Engage the speed you want with the gear range lever (n.3 fig.1). Position:
1.4 Allows 1st or 4th speed or 1st reverse depending on the reduction lever
ratio.
2.5 Allows 2nd or 5th speed or 2nd reverse depending on the reduction lever
ratio.
3.6 Allows 3rd or 6th speed or 3rd reverse depending on the reduction lever
ratio.
Gear
SLOW AND REVERSE
GEAR LEVER
GEAR LEVER
Gear
Gear
1st
Wheels
7.50-16 1,3
8.25-16 1,3
11.5/80-15.3 1,4
7.50-20 1,5
7.50-16XS 1,3
7.50-18 1,4
260/80-R20 1,6
9.5-R20 1,5
250/80-R18 1,4
9.00-R16XS 1,5
29x12.50-15 1,2
Do not ride the clutch since this will cause excessive wear on the thrust bearing.

4.5 STOPPING THE TRACTOR

a) Move the throttle (n.4 fig.1) forward to its minimum setting.
b) Push in the clutch (n.12 fig.1)
c) Put the gear lever (n.3 fig.1) and the slow/reverse gear lever (n.14 fig.1) in
neutral pull the hand brake up (n.10 fig.1).
SELECTING GEARS
1st 2nd 3rd
R R
1-4 2-5 3-6
SPEED CHART
In kph - with engine at 3000 Rpm
(All speeds indicative only)
Slow
2nd 3rd 4th
2,7 4,4 6,5
2,8 4,6 6,8
2,9 4,8 7,1
3,0 5,0 7,4
2,8 4,6 6,9
2,9 4,9 7,2
3,2 5,3 7,9
3,8 5,3 7,9
2,9 4,9 7,2
3,1 5,1 7,5
2,5 4,1 6,0
45
4th 5th 6th
R V V V
1-4 2-5 3-6
Fast
5th 6th
13,6 22,4
14,2 23,3
14,9 24,5
15,4 25,4
14,3 23,6
15,0 24,8
16,5 27,1
16,4 27,1
15,0 24,8
15,8 25,9
12,6 20,8
1st 2nd 3rd
RM RM RM
RM RM RM
1-4 2-5 3-6
Reverse
1st 2nd 3rd
1,8 3.8 6,3
1,9 4,0 6,6
2,0 4,2 6,9
2,1 4,3 7,2
1,9 4,0 6,7
2,0 4,2 7,0
2,2 4,6 7,7
2,2 4,6 7,6
2,0 4,2 7,0
2,1 4,4 7,3
1,7 3,5 5,9