Setup Menu; Display Mode - Sim2 Multimedia Mico 50 Manual De Uso E Instalación

setup menu

You can adjust the projector's settings to your preferences with the following options.
h/V Keystone
Correcting Trapezoidal Distortion and Adjusting Vertical Size of the picture:
This function allows for Keystone correction.
•
When the image is projected either from
note
toward the screen at an angle, the image becomes distorted
trapezoidally. The function for correcting trapezoidal distortion is
called Keystone Correction.
1 select "h Keystone" or "V Keystone" in the setup
Selection
Horizontally adjusts the
H Keystone
Vertically adjusts the
V Keystone
2 Press" t" or "u" to adjust the keystone
correction.
•
Since the trapezoidal distortion of the
note
image can be corrected up to various
angles, the actual screen can be
diagonally set up to that angle as well.
•
Straight lines or the edges of images may
appear jagged while adjusting the image.

Display Mode

These functions allow you to increase the brightness of the
projector.
•
Although noise is increased when "Display
note
Mode" is set to "Overlap", brightness
increases by 20%.
•
"Display Mode" mode is factory preset to
"Normal".
Status Brightness
Normal
Overlap
Description
keystone settings.
keystone settings.
80%
100%
top or from bottom
.
Compresses
upper side.
Compresses
lower side.
Horizontal Keystone Correction
Vertical Keystone Correction
24
MiCO 50
* "V-SIZE" is not displayed
when the value of
"KEYSTONE" is "0".