GD115
99011-36H51-01D
IMPORTANT
BREAK-IN INFORMATION FOR YOUR MOTORCYCLE
The initial 1600km are the most important in the life of
your motorcycle. Proper break-in operation during this
time will help ensure maximum life and performance
from
your
new
motorcycle.
manufactured from high quality materials, and machined
parts are finished to close tolerances. Proper break-in
operation allows the machined surfaces to polish each
other and mate smoothly.
Motorcycle reliability and performance depend on
special care and restraint exercised during the break-in
period. It is especially important that you avoid operating
the engine in a manner which could expose the engine
parts to excessive heat.
Please refer to the "BREAK-IN" section for specific
break-in recommendations.
WARNING/CAUTION/NOTICE/NOTE
Please read this manual carefully and strictly follow the
instructions described herein. To emphasize important
issues,
the
words
"WARNING",
"NOTICE" and "NOTE" are used in this manual. Please
pay special attention to these sections.
WARNING
May endanger the safety of the rider, neglecting
this information might lead to harm and injury.
V01 Export
ENG
2014-08-11
SUZUKI
parts
are
"CAUTION",
CAUTION
Highlights special precautions or procedures that
must be followed in order to avoid damaging the
motorcycle.
Indicates a potential hazard that could result in
motorcycle or equipment damage.
NOTE: Special explanations for easier maintenance or
further clarification of important instructions.
FOREWORD
Motorcycling is one of the most exhilarating sports and,
to ensure your riding enjoyment, you should become
thoroughly familiar with the information presented in this
Owner's Manual before riding your motorcycle.
The proper care and maintenance that your motorcycle
requires is outlined in this manual. By following these
instructions closely you will ensure a long trouble-free
operating life for your motorcycle. Your authorized
SUZUKI dealer has experienced technicians that are
trained to provide your motorcycle with the best possible
service with the right tools and equipment.
All
information,
illustrations,
specifications contained in this manual are based on the
latest product information available at the time of
publication. Due to improvements or other changes,
there may be some discrepancies in this manual.
1
NOTICE
photographs
and