Maintenance And Repairs; Preparing The Truck For Maintenance And Repairs - Jungheinrich EKS 314 Manual De Instrucciones

6

Maintenance and Repairs

Qw W
Load bearing parts of the truck, e. g. chassis and mast, may only be welded
after consultation with the manufacturer.
6.1

Preparing the truck for maintenance and repairs

All required safety measures must be taken to prevent any accidents in the course of
the servicing and maintenance operations. The following preparatory operations
must be performed:
– Park the truck securely (see section "Park the truck securely" in Chapter E).
– Disconnect the battery to prevent the truck from being switched on accidentally
– When working under a raised lift truck, block, support and secure it to prevent it
from lowering, tipping or sliding away.
– Remove the electronic compartment cover at the back.
Qw W
When work has to be performed under the lifted load lifting device or truck,
suitable measures must be taken to prevent any dropping, tilting or slipping
of the truck. When lifting the industrial truck, the instructions contained in
chapter "Transportation and commissioning" have to be observed.
Secure the truck against rolling away when you work on the parking brake.
G 12