Camera Recording - Dedicated Micros system sprite Guia Del Usuario

Camera Recording

The System Sprite can be setup to record all cameras or selected
cameras. All the cameras are recorded by default (upper menu).
To change the cameras to be recorded:
1. Press the Up cursor key to change the edit field to Selected
cameras.
2. A menu will display the cameras to be recorded (Lower menu)
3. Press the camera key to toggle the camera in or out of the record
sequence. This camera will be displayed behind the menu.
(Cameras in the record sequence are denoted by a filled box).
In the example shown cameras 5 and 11 are not normally recorded.
Note: Any cameras taken out of the normal recording sequence will be
recorded during an alarm or activity period, if it has an associated alarm
or it has been set up for activity detection.
Œ
To Navigate
Use the UP/Down keys to select Option
To Exit
Press the
MODE
14 Camera Recording
Record
16:49:52
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Camera Recording
All cameras
04/03/1999
Camera Recording
Record Selected cameras
Use camera keys to edit
1 2 3 4 5 6 7
n n n n o n n
9 10 11 12 13 14 15
n n o n n n n
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Version 1.0
VEXT
8
n
16
n
VEXT