Changing Screen Modes - Dedicated Micros system sprite Guia Del Usuario

Changing the screen modes
A System Sprite multiplexer is capable of displaying the cameras in various ways; full screen, Picture in Picture (P in P), as a
quad (2x2), 9-way (3x3), 10-way (8+2) or 16-way (4x4). Each of these modes can display a sequence of cameras.
Full To display a camera in full screen, press the required camera key.
Picture in Picture The P in P key provides a picture in picture display on the main monitor. As default the PIP segment
will display a sequence of all cameras excluding the one already displayed in the main picture area.
Subsequent presses of the P
Quad Pressing the Quad key provides a 2 x 2 picture display on the main monitor. Subsequent presses of
the
QUAD
display will sequence through all cameras excluding the three already displayed onscreen.
Multiscreen Pressing the Multi-screen key displays a 9-way 3 x 3 display, subsequent presses will display a
16-way (4x4), and 10-way 8 + 2 display. As default the lower right segment of the 3 x 3 and the 8 +
2 displays will sequence through all cameras excluding the ones already displayed onscreen.
Screen editing within PiP, Quad and the Multiscreen displays
As default cameras are presented in numerical order within all multiscreen displays. This can be changed to suit individual
customer or operator preferences.
To change the camera displayed within in a segment:
1. Select the PIP, QUAD or multiscreen format to be changed.
2. Press and hold the corresponding to the onscreen display. Eg: With a quad view displayed press and hold the
edit it.
Confirmation of entry into screen setup mode is provided through both an onscreen prompt, and illumination of the
"Select" LED on the front panel keyboard.
3. The camera number associated with the top left-hand segment is highlighted. Use the cursor keys to move this highlight to
the desired screen segment.
4. Press the camera key to enter that camera into the highlighted segment.
32 Operating in Live and Play Mode
P key will toggle the segment and main area camera images.
IN
key will start and stop the quad sequence. As default the lower right segment of the quad
key to
QUAD
Version 1.0