Alarm To Camera Presets - Dedicated Micros system sprite Guia Del Usuario

Alarm to Camera Presets

This menu is not displayed if the Alarm option is set to "Always off" in
the Detection Periods menu. (Page 16).
The System Sprite is capable of recalling a Telemetry preset position
when an alarm is triggered.
To select the alarm preset position:
1. Use the up and down cursor keys to highlight the camera
number you wish to change or press the camera key.
2. Press the right cursor key to move the highlight onto the Alarm
to preset option.
3. Use the up and down cursor keys to change the Alarm to preset
option to On.
4. Press the right cursor key to highlight the Preset No. Option.
5. Use the up and down cursor keys to change the preset number.
Repeat the instructions above for all cameras to be editted then press the
key to exit the menu system.
MODE
Œ
To Navigate Use the UP/Down keys to select Option
To Exit
Press the
MODE
20 Alarm to Camera Presets
Camera
1
2
3
4
5
6
7
8
9
16:49:52
MODE
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Alarm to Camera Presets
Alarm to Preset Preset No.
off 00
off 00
off 00
off 00
off 00
off 00
off 00
off 00
off 00
04/03/1999
key to go to the next menu or press and hold the
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Version 1.0
VEXT